NEWS

The forming of steel products is mainly completed by rolling in a rolling mill. Depending on the temperature during rolling, there are hot and cold rolling.

Angular contact ball bearings have the characteristics of a small contact angle, large number of contact points, high load-bearing capacity, and small friction torque.

The lubrication of the roll bearings is an important link to ensure the rolling mill's normal operation and extend the roll's service life.

For bearings, ring breakage is one of the problems that plague bearing quality, and defective breakage is the main form of ring breakage.

Oil-film bearings, also known as liquid friction bearings and ideal sliding bearings, are one of the key core components of modern rolling mills.

Deep groove ball bearings are widely used types of rolling bearings. The basic design of a deep groove ball bearing comprises an outer ring, an inner ring, steel balls, and cages.

Chamfer is a term in mechanical engineering. To remove the burr on the part due to machining and to facilitate the assembly of the part, a chamfer is generally made at the end of the part.

When the bearing rotates, the free vibration of the cage and its impact on the rolling elements or rings will cause noise.

The combined bearing is assembled by the axial and radial roller bearings, which reduces the bearing volume and simplifies the installation structure, thus reducing the manufacturing cost.